ProjectGO

GoPro Hero 12 Hypersmooth (Tips voor de beste stabilisatie)

De GoPro Hero 12 HyperSmooth 6.0 represents the latest innovation from GoPro, having earned an Emmy award for its in-camera sensor and software stabilization.

It has been tested in various scenarios, including biking and skiing, to gather insights on its optimal use.

Today, you’ll learn how to activate HyperSmooth and discover the best settings for stabilized videos.

QUICK TAKE

  • Use HyperSmooth in low-light by selecting 4K resolution and 30 FPS for a balance of detail and light capture
  • Enable HyperSmooth stabilization from the camera settings and consider Boost mode for extra stability
  • For optimal HyperSmooth performance, use recommended shutter speeds: 1/120 for helmet mounts or Linear lens, 1/240 for chest mounts or SuperView lens.

 

What is Hypersmooth


HyperSmooth is een Krachtige elektronische beeldstabilisatiefunctie that reduces camera shake and makes your footage look smooth and professional. 

How To Activate Hypersmooth

To activate Hypersmooth on your GoPro Hero 12 follow the steps below:

 

HYPERSMOOTH

 

HyperSmooth Modes

HyperSmooth Options Based on Aspect Ratio

 

When To Use Hypersmooth


Here are some situations when you want to use HyperSmooth:

Here comes my short video where I explain practical situations where you should’t use Hypersmooth:

 

Tips for The Best Stabilization


To maximize the benefits of HyperSmooth, consider the following tips:

Zoom in

For exceptionally shaky activities, zoom in a bit. While you’ll slightly reduce your field of view (FOV), this offers a greater margin for stabilization. A minor zoom of about 10-15% can significantly enhance stabilization, and the decrease in FOV is hardly noticeable.

Use Linear Mode

Using Linear Mode offers more stabilization. Compared to Wide FOV, Linear Mode inherently has a broader stabilization margin. As a bonus, it keeps your lines straight.

 

Tips For Hypersmooth in Low-Light


HyperSmooth can be tricky to use in low-light conditions, as it requires a certain shutter speed to work properly.

Here are some tips to help you master HyperSmooth in low-light situations:

Kies de juiste videomodus

De Hero 12 biedt drie videomodi: Standaard, HDR en Log. Standard mode is the simplest option, but it may not capture the best colors and details in low light. HDR mode enhances the dynamic range of your footage, but it only works in 5.3K and 4K resolutions.

Log mode gives you the most flexibility and control over your footage, but it requires color correction in post-production. Depending on your preference and editing skills, you can choose the mode that suits you best.

Pas de resolutie en framerate aan

The higher the resolution, the more detail you can capture, but also the more light you need. The lower the framerate, the more light you can capture, but also the more motion blur you may get.

A good balance is to use 4K resolution and 30 FPS, omdat je dan genoeg detail en licht krijgt zonder al te veel in te leveren op de vloeiendheid. Je kunt ook een resolutie van 5,3K gebruiken als je je opnamen later wilt bijsnijden of inzoomen.

Selecteer de lens (gezichtsveld)

De Hero 12 biedt vier lensopties: Smal, Lineair, Breed en Superzicht. The wider the lens, the more distortion and fisheye effect you may get, but also the more stabilization you may get. SuperView is the widest lens option, and it provides the tallest and widest field of view ever seen on a HERO camera.

It is ideal for chest mounts or capturing immersive scenes. Wide is slightly less wide than SuperView, but still provides a good amount of stabilization. Linear is a more natural-looking lens option, with minimal distortion and fisheye effect. It is ideal for helmet mounts or capturing realistic scenes.

Narrow is the narrowest lens option, with no distortion or fisheye effect at all. It is ideal for close-ups or capturing specific subjects.

Adjust White Balance

Deze instelling bepaalt hoe warm of koel je video zal zijn. Je kunt kiezen uit verschillende voorinstellingen of een aangepaste waarde in Kelvin graden instellen. Voor situaties met weinig licht wil je misschien een voorinstelling gebruiken die overeenkomt met je lichtbron (zoals Tungsten of Fluorescent) of een aangepaste waarde die je video er natuurlijk laat uitzien (zoals 4000K of 3500K).

Set Up Your Shutter Speed

This setting determines how long each frame of your video is exposed to light. The longer the shutter speed, the more light you can capture, but also the more motion blur you may get. The shorter the shutter speed, the less light you can capture, but also the less motion blur you may get. 

For low-light situations, you need to use a specific shutter speed that allows HyperSmooth to work properly. The recommended shutter speeds are:

 

 

 Should You Use Hypersmooth?


HyperSmooth is a game-changer when it comes to stabilizing your videos, especially during those dynamic activities. Whether you’re mountain biking on a rugged trail like I did, skiing down a snowy slope, or simply walking through a bustling city, HyperSmooth ensures your footage remains silky smooth, eliminating those jarring shakes.

I recommend to use it anytime you anticipate movement or want to capture steadier, professional-looking videos. Trust me, your viewers will thank you for the cinematic feel!

 

Bedankt voor het lezen!

I hope this guide helped you learn all about GoPro Hero 12 Stabilization 🙂

 

Delen is zorgzaam ️

Als u dit artikel nuttig vond, gelieve delen op social media met je familie en vrienden!


Gerelateerde artikelen:

Mobiele versie afsluiten